New Garmin EPIX PRO 51mm model missing?

[partenov]

Hi Ruanlyze,
I have a new Garmin device - EPIX (Gen2) PRO 51mm. From today's activity I did not see the device listed in the activity and the elevation data is not taken from the device barometer.
Do you have a timeline when the new models will be available in the database?

Thanks,
Iliya

[mipapo]

We are adding new devices from time to time. Looking for new ones 1-2x per month.

[partenov]

Thanks for the reply. I will wait then for the device to become available on your side.

Regards,
Iliya

[mipapo]

@partenov It's the new generation of the EPIX correct?

[partenov]

@mipapo Yes it is the latest PRO generation of EPIX Gen2. In my case it is epix™ Pro (Gen 2) – Sapphire Edition | 51 mm

Thanks.

[partenov]

Hi again,
now I see the device info in the activity (see device_info.png)

Epix Pro visible in activity view

device_info.png (1.27 KiB) Viewed 1260 times

.
Thanks for that.
However the barometric data (elevation) seems to be taken from some map files and not from the barometer of the EPIX pro device. At least this is what it says in the elevation source. See elavation_data_source_now.png.

Elevation source now

elavation_data_source_now.png (14.18 KiB) Viewed 1260 times

For comparison there is a screenshot with my old device where the data is from its barometer. At least this is what it is written in the source field. See elavation_data_source_before.png

Elevation source with my old device

elavation_data_source_before.png (17.9 KiB) Viewed 1260 times

s there some setting which I am missing?
Thanks in advance.

[mipapo]

https://runalyze.com/settings Set correct information to never for now.
I'm not able to fix the device entry in this week
And simply remove the corrected data series from that activity

[partenov]

@mipapo Thanks for the suggestion.
Take your time . I am not in a hurry.
Cheers!
Iliya

[mipapo]

Should be fixed now

[partenov]

I have tested the fix but seems that it does not detect the barometer automatically.
The setting for "Automatically correct elevation data" is set to "Only if device has no barometer"
In the activity view I still see that the elevation data source is from "corrected (Mapzen Terrain Files)"
When I manually remove the correction for the activity then I see "Garmin Epix Pro (barometer)" as the source.

Cheers,
Iliya